Table of Contents
Advertisement
AS SE M BLY S T EP 2
A) Open HARDWARE BAG FOR STEP 2.
B) Carefully pull the CONSOLE CABLES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
D) Insert the left TOP SIDE COVER, followed by the right TOP SIDE COVER and snap them together.
E) Slide CONSOLE MAST GROMMET down to seal the console mast hole.
HARDWARE BAG FOR STEP 2 CONTENTS :
Hide quick links:
Advertisement
Table of Contents
