Replacing The Secondary Hard Disk Drive - Lenovo 6176 Hardware Maintenance Manual

Replacing the secondary hard disk drive

This procedure provides instructions on how to replace the secondary hard disk
drive.
To replace the secondary hard disk drive:
134
Hardware Maintenance Manual
Important
When a new hard disk drive is installed, a set of Product Recovery discs might
be required. The set of Product Recovery discs enable the contents of the hard
disk to be restored to the same state as when the computer was originally
shipped from the factory. For more information on recovering
factory-installed software, refer to "Recovering Software" in the User Guide.
1. Remove the computer cover. See "Removing the cover" on page 117.
2. Locate the secondary hard disk drive 5 .
3. Disconnect the signal and power cables from the hard disk drive.