Tools Included - Horizon Fitness CE5.1 Owner's Manual

toolS inclUDeD:

F Screwdriver
F 8 mm L-Wrench
F 6 mm L-Wrench
F 5 mm L-Wrench
F 13/15 mm Flat Wrench
partS inclUDeD:
F 1 Main Frame
F 1 Stabilizer Tube
F 1 guide Rail Set
F 2 Pedal Arms
F 2 Lower Handlebars
F 2 Upper Handlebars
F 2 Lower Link Arms With Footpads
F 1 Top Cap
F 1 Top Cap Rear Cover
(EX-68, EX-78 and gS1040E only)
F 1 Console Mast
F 1 Console Mast Boot
F 1 Console
F 2 Handlebar Caps
F 1 Water Bottle Holder
F 1 Rear Cover (EX-78 only)
F 1 Audio Adapter Cable
F 1 Power Cord
F 7 Hardware Bags
pre ASSEMBLY
UnpacKinG
Unpack the product where you will be using it. Place the elliptical carton on a level flat
surface. It is recommended that you place a protective covering on your floor. Never
open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
neeD Help?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
all
MoDelS
7