Advertisement
AP1014i
TECHNICAL SPECIFICATIONS
QoS
WMM support
Dynamic WMM rate adaptation
Configurable QoS rules per user and application
OPERATING MODES
Centralized mode
Distributed mode
Remote VPN tunnel mode
Mesh mode
SECURITY
Access Control
WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS,
EAP-TTLS, PEAP, LEAP, EAP-FAST, EAP-SIM, EAP-AKA, and EAP-MD5)
802.1X and captive portal authentication against local database on the
controller, RADIUS, and Active Directory
RADIUS-assisted per-user and per-ESSID access control via MAC filtering
Rogue Detection and Suppression
Capable of scanning 802.11n and 802.11b/g for rogue devices
MANAGEMENT
Centrally managed by any Meru controller running System Director 5.3
and above
Automatically discovers controllers and downloads configuration settings
for plug-and-play deployment
Upgrades and management using System Director/E(z)RF
Support for SNMP
WIRELESS SPECIFICATIONS
Radio Technologies
Single-radio, single-band 802.11n, indoor access point; 2x2 MIMO with
two spatial streams; support for both 20 MHz and 40 MHz
Supported radio technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11g/n: Orthogonal frequency division multiplexing (OFDM)
802.11n: 2x2 MIMO with two spatial streams
Modulation
Supported modulation types
802.11b: BPSK, QPSK, CCK
802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band
Supported frequency bands:
2.400–2.485 GHz
(country-specific restrictions apply, adjusted by controller upon approval)
Operating Channels
2.4 GHz channel: 1 to 11 for U.S. & Canada, 1 to 13 for Europe, 1 to 14 for Japan
Channels configurable upon regulatory approval
0deg
10.00dB
5.00dB
0.00dB
-5.0dB
-10.00dB
-15.00dB
-20.00dB
-25.00dB
-30.00dB
-35.00dB
-40.00dB
90deg
180deg
X-Y Panel
For more information about the Meru AP1014i, visit
Meru Networks | Copyright © 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks,
Inc. All other trademarks, trade names, or service marks mentioned in this document are the property of their respective owners. 8.12 DS1058.US
Data Rate
Data rates supported (Mbps):
802.11g: 6, 9, 12, 18, 24, 36, 48, 54
802.11b: 1, 2, 5.5, 11
802.11n: 6.5 - 300 (MCS0 to MCS15)
Transmit Power and Receive Sensitivity
IEEE 802.11b
EEE 802.11g
IEEE 802.11n (HT20)
IEEE 802.11n (HT40)
Configurable Transmission Power
Transmission power configurable in 1.0 dBm increments
PHYSICAL SPECIFICATIONS
Antenna
Two integrated 2.4 GHz PIFA antennas with antenna gain (typical) of
3.5 and 2.6 dBi
Power
802.3af PoE only
Interfaces
One 10/100BASE-T Ethernet (RJ45), auto-sensing link speed and MDI/
™
Network Manager
MDX, with 802.3af PoE
Four 10/100BASE-T Ethernet (RJ45), auto-sensing link speed and MDI/MDX
One USB 2.0 port (Type-A connector) – not used
Indicators
Two LEDs over facade for AP status, additional LEDs for Ethernet activity
Mounting
Wall or ceiling mount
Access point includes:
Mount over 15/16" T-bar (no tools required)
Lock key
Other mounting kits sold separately:
MNT-SCRMKIT-03, 5-pc mounting adapter for standard dropped ceiling
MNT-SCRMKIT-04, 5-pc mounting adapter for Interlude/Silhouette ceilings
MNT-WMKIT-01, wall-mount kit
Dimensions
6.78" x 6.78" x 1.91"(17.20 cm x 17.20 cm x 4.80 cm)
Weight
0.76 lb (0.35 kg)
Environmental
Operating temperature: 32˚ F to 122˚ F (0˚ C to 50˚ C)
Operating humidity: 5–95% (non-condensing)
Storage temperature: -40˚ F to 185˚ F (-40˚ C to 70˚ C) ambient
Storage humidity: 5–95% (non-condensing)
Y
X
270deg
90deg
www.merunetworks.com
or email your questions to: info@merunetworks.com.
Maximum Transmit
Receive Sensitivity at
Power (EIRP)
Highest Data Rate
21 dBm
-88 dBm
17 dBm
-72 dBm
20 dBm
-70 dBm
20 dBm
-70 dBm
Z
0deg
10.00dB
5.00dB
0.00dB
-5.0dB
-10.00dB
-15.00dB
-20.00dB
-25.00dB
-30.00dB
-35.00dB
-40.00dB
270deg
180deg
X-Z Panel
Regulatory Approval
FCC
EU R&TTE Directive 1995/5/EC
RS-210
ICES-003
VCCI
ARIB-STD33 & STD66
For more country-specific regulatory
approval, please contact your Meru
representative.
Certifications
EU RoHS Compliant
China RoHS Compliant
WEEE & REACH Compliant
Wi-Fi certified 802.11b/g/n
Warranty
Limited lifetime warranty
Part Numbers
AP1014i Single-band, single-radio IEEE
802.11b/g/n, 2x2:2 MIMO access point
(includes integrated 2.4 GHz antennas)
Meru delivers an all-wireless network that
fully supports the enterprise, delivering a
consistent, interactive experience for all
users. No matter what applications they
are running. No matter how many other
users are on the network.
X
Corporate Headquarters
894 Ross Drive, Sunnyvale, CA 94089
T +1.408.215.5300
F +1.408.215.5301
E info@merunetworks.com
Advertisement
