Technical Specifications - Meru Networks AP1000 SERIES Specification

AP1000 SERIES

TECHNICAL SPECIFICATIONS

SECURITY
Authentication
Combination of captive portal, 802.1x, and open authentication
Advanced security using WPA2
802.1x with EAP-Transport Layer Security (EAP-TLS), Tunneled
TLS (EAP-TTLS), Protected EAP (PEAP), MS-CHAPv2, Smartcard/
Certificate, Lightweight EAP (LEAP), EAP-FAST, EAP-MD5, EAP-SIM
and EAP-AKA, with mutual authentication and dynamic, per-user,
per-session unicast and broadcast keys
Secure HTTPS with customizable captive portal utilizing RADIUS
Encryption Support
Static and dynamic 40-bit and 128-bit WEP keys, TKIP with
MIC, AES
Security Policy
RADIUS-assisted, per user and per ESSID access control via
MAC filtering
Multiple ESSID/BSSID, each with flexibility of separate and
shared security policy
Rogue Detection and Suppression
All radios capable of scanning 802.11n, 802.11a, and
802.11b/g for rogue devices
MOBILITY
Zero-loss Handoffs
Infrastructure-controlled zero-loss handoff mechanism for
standard Wi-Fi clients
Preemptive roaming and load balancing with band steering is
built in by design
CENTRALIZED MANAGEMENT
Zero Configuration
Automatically selects power and channel settings
Automatically discovers controllers and downloads
configuration settings
Zero-touch, plug-and-play deployments
MESH WIRELESS SUPPORT
802.11 mesh features may be enabled via a "mesh" license
applied to the controller. A minimum System Director of v5.2
is required.
Mesh Specifications
Maximum number of mesh "hops": 3
Maximum number of controller supported backhaul links: 4
Maximum number of AP1000 Series nodes per mesh: 16
Maximum number of clients per mesh cluster: 500
System Management
Centralized and remote management and software upgrades
via System Director web-based GUI, SNMP, command line
interface (CLI) via serial port, SSH, Telnet, centrally managed
via E(z)RF™ Network Manager
Centralized security policy for WLAN, multiple ESSIDs and
VLANs with their own administrative/security policies
Intelligent RF Management
Coordination of access points with load balancing for
predictable performance
Centralized auto-discovery, auto-channel configuration, and
auto-power selection for APs
Co-channel interference management
WIRELESS SPECIFICATIONS
Wireless Standards
IEEE 802.11 a/b/g/n, IEEE 802.11i support (AES, WEP, WPA,
WPA2), IEEE 802.11e, WMM
Power Management
Ability to disable unused radios via software to lower power
consumption
AP1000i Antenna
Internal, MIMO, Dual Band, omni-directional antennas
Antenna Gain - 4.0 dBi for 2.4 GHz and 5.0 dBi for 5 GHz.
(Antenna gain not included in Average Transmit Power
specified) Beam Width - Azimuth = 360 degrees, Elevation ~
110 degrees
AP1000e Antenna
Extended RPSMA connectors with off-white omni-directional
antennas included
For more information about the Meru AP1000 Series, visit
Meru Networks | Copyright© 2012 Meru Networks, Inc. All rights reserved worldwide. Meru Networks is a registered trademark of Meru Networks, Inc. All other trademarks,
trade names, or service marks mentioned in this document are the property of their respective owners. 02.12 DS1008.10.US
Client Support
Support for clients that perform active scanning and passive
scanning
Support for clients that pre-authenticate
Support for clients that change to and from power-save
mode rapidly
Power-save mode for mobile battery operated clients
IEEE802.11
Frequency Band
802.11bgn: 2.412 to 2.472 GHz, 13 channels
802.11an: 5.18 to 5.320 GHz, 8 channels; 5.500 to 5.700 GHz, 8
channels (excluding 5.600 to 5.640 GHz); 5.745 to 5.825 GHz,
5 channels
Operating Channels
802.11bgn: 1-11 US/Canada, 1-13 Europe, 1-13 Japan (AP1020i
2nd radio works for channel 14), non-overlapping channels
802.11an: 5 GHz Band: 36 through 165
5.180–5.240 GHz, 8 channels (36, 38, 40, 42, 44, 46, 48); 5.280–
5.320 GHz, 4 channels (52, 56, 60, 64); 5.745–5.825 GHz, 5
channels (149, 153, 157, 161, 165); 5500–5700 GHz, 11 channels
(100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140)
Data Rates (Mbps)
802.11b data rates: 11, 5.5, 2, and 1 Mbps with automatic rate
adaptation
802.11g and 802.11a data rates: 54, 48, 36, 24, 18, 12, 9, and 6
Mbps with automatic rate adaptation
802.11n+20: 130, 117, 104, 78, 65, 58.5, 54, 52, 48, 39, 36, 26, 24,
19.5, 18, 13, 12, 11, 9, 6.5, 5.5, 2, and 1 Mbps
802.11n+40: 300, 270, 243, 216, 162, 135, 121.5, 108, 81.5, 81,
54, 48, 40.5, 36, 27.5, 27, 24, 18, 13.5, 12, 11, 9, 6, 5.5, 2, and 1
Mbps with automatic rate adaptation
Average Transmit Power
802.11b 18 dBm, 802.11g 17 dBm
2.4n (20HT): 16 dBm, 2.4n (40HT): 16 dBm
802.11a 17 dBm
5.0n (20HT): 15 dBm, 5.0n (40HT): 15 dBm
Receive Sensitivity at highest data rates
802.11b = -89 dBm
802.11g = -74 dBm
802.11g(n+20) = -70 dBm
802.11g(n+40) = -70 dBm
802.11a = -68 dBm
802.11a(n+20) = -67 dBm
802.11a(n+40) = -67 dBm
PHYSICAL SPECIFICATIONS
AP1010i and AP1020i Dimensions
171mm wide x 171mm deep x 57mm high
6 3/4" wide x 6 1/2" deep x 2 1/2" high
AP1010i Weight
437 grams / 15.4 oz.
AP1020i Weight
457 grams / 16.2 oz.
AP1010e Dimensions
161mm wide x 114mm deep x 38mm high
6 1/3" wide x 4 1/2" deep x 1 1/2" high
AP1020e Dimensions
167mm wide x 114mm deep x 38mm high
6 1/2" wide x 4 1/2" deep x 3 1/2" high
AP1010e Weight
494 grams / 17.4 oz.
AP1020e Weight
512 grams / 18.1 oz.
Power
802.3af PoE or 802.3at
Draws 9.5W (two radio operation)
Environmental
Operating temperature: 0° to 50° C (32° F to 122° F)
Operating humidity: 90% (non-condensing)
Storage temperature: -10° to +70° C ambient
Storage humidity: 95% (non-condensing)
www.merunetworks.com or email your questions to: info@merunetworks.com
Interfaces
1 Auto sensing 10/100/1000 Base-TX Ethernet (RJ-45)
Dualband
Radios support a combination of 802.11n, 802.11a, 802.11b,
802.11g
1 RJ45 console port (reserved for future use)
2 LEDs for monitoring power, Ethernet activity, 802.11 activity,
and 802.11 receive
1 USB port
Standard Warranty
Limited lifetime warranty
AP1000 Series Part Numbers
AP1010i Single radio 802.11a/b/g/n AP, includes integrated
dual band 802.11 a/b/g/n antennas
AP1020i Dual radio 802.11a/b/g/n AP, includes integrated dual
band 802.11a/b/g/n antennas
AP1010e Single radio 802.11a/b/g/n AP with external antenna
connectors. Includes separate dual band 802.11a/b/g/n
antennas
AP1020e Dual radio 802.11a/b/g/n AP with external antenna
connectors. Includes separate dual band 802.11a/b/g/n
antennas
Certifications
Wi-Fi Certified a/b/g/n
Standards Safety
UL 60950-1; IED 60950-1; CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
For full radio approvals, please contact your local Meru
representative.
Meru delivers an all-wireless network that fully supports the
enterprise, delivering a consistent, interactive experience
for all users. No matter what applications they are running.
No matter how many other users are on the network.
Corporate Headquarters
894 Ross Drive, Sunnyvale, CA 94089
T +1 (408) 215-5300
F +1 (408) 215-5301
E info@merunetworks.com