Mitsubishi HS-HD1100U Service Manual page 13

Hide thumbs Also See for HS-HD1100U:

Table of Contents

Enlarged version

4. PCB-1394/D-VHS

1. Remove the Top Cover.

(Refer to Para. 1 of the DISASSEMBLY.)

2. Lift and remove the Cover D VHS as shown in Fig.10.

3. Remove the one screw (a) and remove the PCB

HOLDER shown in fig. 10.

4. Disconnect the connectors EE ,EK and EX on the PCB-

1394/D-VHS .

5. Pull out the Part A,lift and remove the Spring Earth

EMC as shown in Fig. 10.

6. Unfasten the one screws (b) shown in Fig. 10 and

remove the ASSY PCB-1394/D-VHS.

7. Separate the bottom of the Shield Cover from the ASSY

PCB-1394/D-VHS first. Remove the Shield Cover

moving the bottom in the direction shown by the arrow

(A) as shown in Fig. 10.

8. Disconnect thirteen soldering connections and remove

the PCB-1394/D-VHS as shown in Fig. 11.

PCB HOLDER

PCB-1394/D-VHS

Soldered part

- 9 -

Cover D VHS

Part A

Spring Earth EMC

ASSY PCB-1394/D-VHS

Shield Cover

Fig. 10

Soldered part

Fig. 11

Table of Contents