Toshiba teli BU030 Specifications page 8

2.8 IIDC2* Digital Camera Control Specification Ver.1.0.0 conformity
This product is based on IIDC2 Digital Camera Control Specification Ver.1.0.0.
2.9 e-CON* Connector adoption
The e-CON connector adoption enables to assemble the cable easily without using special tools.
2.10 Binning mode
B/W models have binning mode. In this mode, pixel data is combined by vertical and horizontal.
Vertical binning mode achieves high frame rate
2.11 Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger
signal. Trigger control from PC is available as well.
2.12 Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output
area. And reduces occupied data rate of USB bus by reducing horizontal output area.
2.13 Color processing
Color models have built in color processing. There are RGB, YUV 4:2:2, YUV 4:1:1, Bayer and
Mono output modes.
2.14 IR-cut filter
Build-in IR-cut filter models are optional for color models.
Suffix [F] is attached to the model name of built-in IR-cut filter model. (e.g. BU030CF, BU130CF)
* Suffix [F] is not shown in the common part of specifications.
2.15 Compact and lightweight
This camera is compact and lightweight; it is easy to integrate into industrial equipment.
2.16 EU RoHS & Chinese ROHS
* USB is a unified standard established by USB-IF(USB Implementers Forum).
* USB3 Vision is a unified standard established by AIA (Automated Imaging Association).
* GenICam is a registered trademark of EMVA (European Machine Vision Association).
* IIDC2 is a unified standard established by JIIA (Japan Industrial Association).
* e-CON (Easy & Economy connector) is a sensor connector that is normalized by the
manufacturer of the sensor, FA equipment and connector.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
6
D4212818G
www.toshiba-teli.co.jp