Toshiba teli BU030 Specifications page 12

Notes on long exposure:
- When you set the exposure time longer than approximately 1 second, white spots and the
unevenness in highlight portion might occasionally be observed on screen. This phenomenon is
due to the characteristics of the CCD device. It's not a malfunction of the camera itself.
Note on Random Trigger Shutter:
- When the trigger signal is noisy, there is a possibility of causing the malfunction. In this case, please
input a noise-free signal.
5.9 Trigger Delay
You can add the delay between trigger signal input and the start of exposure.
Trigger signal
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Exposure
USB bus
TriggerDelay
Image
10
D4212818G
www.toshiba-teli.co.jp