Toshiba teli BU030 Specifications page 19

6.2 Internal sync signal specification
Fundamental clock
frequency
Fundamental clock
frequency
6.3 Electronic shutter specification
Exposure time
MANUAL
Exposure time
MANUAL
6.4 Random Trigger Shutter specification
Trigger Mode
External trigger
Input circuit
Input level
Polarity
Pulse width
Input impedance
Software trigger
Exposure time
Edge mode
Level mode
Bulk mode
Max number of Exposures
in Bulk mode
Trigger Delay
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
BU030 BU031
50.000MHz 50.000MHz
±100ppm ±100ppm
BU030C
50.000MHz
±100ppm
BU030 BU031
10μs to 16s 10μs to 16s
BU030C
10μs to 16s
External trigger, Software trigger
(factory setting : External trigger)
10kΩ
Low: 0 to 0.5V, High: 2.0 to 24.0V
High active / Low active (factory setting : Low active)
USB3 Vision command control
Edge mode, Level mode (factory setting : Edge mode)
The exposure time depends on the MANUAL Exposure time setting
The exposure time depends on External trigger width
The exposure time depends on the MANUAL Exposure time setting
0 to 2000000μs (factory setting : 0μs)
17
BU080
45.000MHz
±100ppm
BU080
MANUAL
30μs to 16s
MANUAL
Input via I/O connector
Inside
DC3.3V
50μs (minimum)
High impedance
255 times
BU130
50.000MHz
±100ppm
BU130C
50.000MHz
±100ppm
BU130
30μs to 16s
BU130C
30μs to 16s
0V
D4212818G
www.toshiba-teli.co.jp