BBQ GSF2818K Instructions Manual page 12

Step 10 (Assemble the side shelves to the body assembly)
c) Loosen the three pre-installed bolts on the right side of body assembly and allow 1/4 bolt's length to extend from body
assembly.
d) Align the holes on the right side shelf (R) with the bolts extended from the right side of body assembly. Push down the
right side shelf until it locks into place.
e) Align the holes on right side shelf with the holes on the control panel and body assembly.
f) Insert one bolt (AA) with one spring washer (CC) and one flat washer (BB) into each pre-drilled holes. (See above
diagram). Tighten bolts by hand until secure.
g) Repeat the procedure for the assembly of left side shelf (C) and body assembly.
h) Go back and tighten all bolts using the screwdriver provided.
GSF2818K
Owner's Manual
Step 11 (Side knob & seat assembly)
a) Align the holes on the side knob seat (S) with
the holes on the right side shelf and the side
burner valve. Screw one bolt (EE) with one flat
washer (FF) into each pre-drilled hole by hand.
b) Tighten the bolts using the screwdriver
provided.
c) Insert the side knob (T) onto the valve shaft.
11