10. ASSEMBLY HINTS
1) Connect the LCD connector to the engine board.
3) Position the top clip and carefully press down
the LCD flex.
5) Slide the LOCKING PLATE ASSEMBLY between the
LCD connector and the bent flex. Press down the
shown clip to lock the LOCKING PLATE ASSEMBLY.
19
2) Use the SS-93 to carefully bend the LCD flex while
pushing the LCD carefully forward.
4) Press down the clips on both sides.
6) Tighten the four TORX + size 6 screws to the
torque of 13 Ncm in the order shown.
Conf idential | Copyright © 2011 NOKIA A ll rights reserved
Nokia E5-00
RM-632 / RM-634 / RM-699
Service Manual Level 1&2
Version 3.0