Hoover Twist & Vac Hand-held Vacuum Cleaner Owner's Manual page 12

How to replace
Disconnect cleaner from electri-
cal outlet.
1. Remove bottom plate, agitator
and belt following directions for
"How to replace belt."
2. Discard old agitator and end caps.
3. If the end caps should fall off the agitator, they are different from each
other and need to be properly oriented as shown below. End caps should
fit tightly on agitator.
0
0
END CAP WITHOUT
SIDE PROJECTIONS
4. Position agitator in nozzle and
replace bottom plate, screws and
front cover following directions for
"How to replace belt."
11
FIBER WASHER
BELT
FIBER WASHER