Connecting To External Devices; When Connecting To Your Pc - LG 47VT30 Owner's Manual

Connecting to External Devices

When Connecting to your PC

First of all, see if the computer, product and the peripherals are turned off. Then, connect
1
the signal input cable.
A.
When connecting with the D-Sub signal input cable.
B.
When connecting with the HDMI-DVI signal input cable (not included).
* When HDMI PC is used, a compatiblity problem might occur.
A.
Rear back of the set
B.
Rear back of the set
* User must use shielded signal interface cables (D-sub 15 pin cable, HDMI-DVI cable) with
ferrite cores to maintain standard compliance for the product.
2
Connect the Audio cable.
Rear back of the set
3
Connect the USB cable.
Rear side of the product
Note
• The monitor's USB terminal supports USB 2.0 and full speed (12Mbps).
PC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
(not included)
(not included)
9
PC/MAC
PC
PC
PC