Adjusting Screen Color
Aspect Ratio
PICTURE
Aspect Ratio
Aspect Ratio
Energy Saving
Picture Mode
To select the image size of the screen.
16:9: Widescreen mode.
Just Scan: Displays the full signal data without cropping any of the image.
(*This menu is activated only in 720p,1080p,1080i (HDMI/DVI-DTV, Component mode)
Original: The aspect ratio is not adjusted from the original signal and is set by the program being
watched.
4:3: Selects a 4:3 aspect ratio image.
1:1: The aspect ratio is not adjusted from the original. Used in PC mode (only HDMI/ DVI PC, RGB PC).
14:9: 14:9 programs are viewed normally in 14:9 with black bars added to the top and bottom.
4:3 programs are magnified on the top/bottom and left/right sides.
Zoom: 4:3 programs are magnified until they fill the 16:9 screen. The top and bottom will be cut off.
Cinema Zoom 1: Choose Cinema Zoom when you wish the picture to be altered, both horizontally
extended and vertically cropped. This is a good compromise between signal
alteration and screen coverage.
Full Wide: When the set receives a wide screen signal, it causes you to adjust the picture
horizontally or vertically, in linear proportion, to fill the entire screen.
H - 80
MODE
AV
ENG
ARC
16 : 9
Just Scan
Original
4 : 3
1 : 1
14 : 9
Zoom
Cinema Zoom 1
Full Wide
KOR
AV
User Menus
Move
OK
: 16:9
: 16:9
16:9
16:9
: Off
Just scan
: Standard
Original
• Backlight
70
4:3
• Contrast
90
14:9
Zoom
• Brightness
50
Cinema Zoom 1
• Sharpness
70
Full Wide
• Color
60
▼
HDMI / DVI
RGB
Component
HDMI / DVI
RGB
Component
SuperSign
SuperSign
21