Page 1
OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODEL 47VL10 www.lg.com...
TABLE OF CONTENTS CONTENTS LICENSES MAKING CONNECTIONS Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or ASSEMBLING AND VCR player PREPARING - HDMI connection Accessories - HDMI/DVI connection Optional Accessories - AV(CVBS) connection Parts and buttons Connecting the stand TROUBLESHOOTING Connecting the Speakers Connecting stand hole cover...
LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand Screws Speaker...
ASSEMBLING AND PREPARING Parts and buttons Screen Buttons Screen Marks Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. ▼▲ Adjust the up and down. ◄ ► Adjusts the volume level.
ASSEMBLING AND PREPARING Connecting the stand Connecting the Speakers - Only on some models. - Only on some models. Take the parts for the stand out of the box and Mount the product onto the speaker by using assemble them as shown in the picture. a screw as shown in the following connect the speaker cable.
ASSEMBLING AND PREPARING Cable Management Using the Kensington security system - Only on some models. The Kensington security system connector is located at the back of the Monitor set. For more Arrange the cables in the center as shown in information of installation and using, refer to the the following picture.
ASSEMBLING AND PREPARING Connecting stand hole cover To install Portrait - Only on some models. - Only on some models. Take the parts for the stand out of the box and When installing Portrait, rotate it clockwise based assemble them as shown in the picture. on its front.
De- slanted wall, it may fall and result in severe tailed installation instructions can be obtained from injury. Use an authorized LG wall mount your local retail store. Please refer to the manual and contact the local dealer or qualified to install and set up a tilting wall mounting bracket.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover.
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC Using the input list Your Monitor set supports the Plug & Play* feature . Selecting an input source * Plug & Play: The function when a PC recognizes Press INPUT to access the input source list.
USING THE MONITOR SET RGB connection HDMI/DVI connection Transmits the analog video signal from your PC to Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor the Monitor set. Connect the PC and the Monitor set with the D-sub 15 pin cable as shown the set with the HDMI/DVI cable as shown the following illustrations.
USING THE MONITOR SET Connecting to the LAN HDMI connection Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and LAN connection the Monitor set with the HDMI cable as shown in the following illustrations.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing main menus Press MENU to access the main menus. Press the Navigation buttons to scroll to one of the following menus and press SET. Press the Navigation buttons to scroll to the setting or option you want and press SET. When you are finished, press EXIT.
CUSTOMIZING SETTINGS PICTURE settings Picture Picture Mode Press MENU to access the main menus. Color Temperature Advanced Press the Navigation buttons to scroll to PICTURE Aspect Ratio press SET. Picture Reset Screen Press the Navigation buttons to scroll to the setting or option you want and press SET.
Page 17
CUSTOMIZING SETTINGS Setting Description Color Color Settings Temperature Option Cool Sets the screen color to a bluish tone. Medium Sets the screen to the standard color. Warm Sets the screen color to a reddish tone. User Select this option to use the user-defined settings. Advanced Gamma You can adjust brightness of dark area and middle gray level area of the...
Page 18
WATCHING TV Aspect Ratio - Original : The aspect ratio is not adjusted from the original. It is set by the program being Resize the image to view the image at its optimal watched. size by pressing ARC button while you are watching Monitor set.
Page 19
WATCHING TV 14:9 : You can view a picture format of 14:9 or a general Monitor set programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right. Zoom 1,2 : The following selection will allow you to view the picture without any alteration, while...
CUSTOMIZING SETTINGS AUDIO settings AUDIO Sound Mode Press MENU to access the main menus. Auto Volume Press the Navigation buttons to scroll to AUDIO and press Balance SET. Speaker Press the Navigation buttons to scroll to the setting or option you want and press SET. - To return to the previous level, press .
CUSTOMIZING SETTINGS TIME settings TIME Sleep Timer Press MENU to access the main menus. Auto Sleep Press the Navigation buttons to scroll to TIME and press Power On Delay SET. Power Saving Automatic Standby Press the Navigation buttons to scroll to the setting or option you want and press SET.
CUSTOMIZING SETTINGS OPTION settings OPTION Language Press MENU to access the main menus. Key Lock Press the Navigation buttons to scroll to OPTION and press ISM Method SET. Power Indicator DPM Select Press the Navigation buttons to scroll to the setting or Tile Mode option you want and press SET.
Page 23
CUSTOMIZING SETTINGS Setting Description Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved.
Page 24
CUSTOMIZING SETTINGS Tile Mode Configuration of an integration screen is available as well as configuration of One by one Display. • 2X1: • Off: • 2X2: • 3X3: When the Tile When using 4 monitors When using 2 monitors When using 9 monitors Mode option is disabled ID 2...
CUSTOMIZING SETTINGS INFORMATION settings INFORMATION Set ID Press MENU to access the main menus. Serial No. Press the Navigation buttons to scroll to OPTION and press SW Version SET. IP Address MAC Address Press the Navigation buttons to scroll to the setting or option you want and press SET.
MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the Monitor set’s back panel. Find an external device you want to connect to your Monitor set shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details.
MAKING CONNECTIONS Connecting to a HD receiver, HDMI/DVI connection DVD, Camcorder, Camera, Transmits the digital video signal from an external Gaming Device or VCR device to the Monitor set. Connect the external player device and the Monitor set with the HDMI/DVI cable as shown in the following illustration.
MAKING CONNECTIONS AV(CVBS) connection Transmits the digital video and audio signals from an external device to the Monitor set. Connect the external device and the Monitor set with the BNC cable as shown on the following illustration. RCA-PC BNC Cable Audio Cable (not included) (not included)
TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution y See if the power cord is properly connected to the outlet. Is the product power cord connected? y See if the power switch is turned on. Is the power indicator light on? y May need service.
Page 30
Install the product driver, which is provided with the product, or Did you install the driver? download it from the web site. (http://www.lg.com) y See if the plug&play function is supported by referring to the video card user manual.
Page 31
TROUBLESHOOTING After-image appears on the product. Problem Resolution y If you use a fixed image for a long time, the pixels may be damaged After-image appears when the product is turned off. quickly. Use the screen-saver function. The audio function does not work. Problem Resolution No sound?
SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.8 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Video Signal Max. Resolution RGB : 1920 X 1080 @60Hz HDMI/DVI : 1920 X 1080 @60Hz - It may not be supported depending on the OS or video card type.
Page 33
SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1117 mm x 661 mm x 118.7 mm / 28.54 kg 1117 mm x 757.8 mm x 302.6 mm / 32.56 kg 1117 mm x 661.0 mm x 118.7 mm / 29.29 kg 1117 mm x 757.8 mm x 302.6 mm / 33.3 kg * Applicable only for models that support the speakers Audio...
Page 34
SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI/DVI Resolution (DTV) Horizontal Vertical Resolution Frequency(kHz) Frequency(Hz) 480i 31.469 70.8 640 x 350 576i 31.468 70.8 720 x 400 480p 31.469 59.94 640 x 480 576p 37.5 640 x 480 720p 37.879 60.317 800 x 600 46.875...
CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 225 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture.
CONTROLLING THE MULTIPLE PRODUCT Command reference list COMMAND DATA 01. Power 00H to 01H 02. Input Select 02H to 09H 03. Aspect Ratio 01H to 09H 04. Screen Mute 00H to 01H 05. Volume Mute 00H to 01H 06. Volume Control 00H to 64H 07.
Page 37
CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA 36. Auto Sleep 00H to 01H 37. Power On Delay 00H to 64H 38. Language 00H to 09H 39. DPM Select 00H to 01H 40. Reset 00H to 02H 41. Power Saving 00H to 03H 42.
CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f, x) * [Command 2]: Second command.(a to u) * [Set ID]: Set up the Set ID number of product. range : 01H to 63H.
Page 39
CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Screen Mute (Command: k d) To control Power On/Off of the set. To select screen mute on / off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off)
Page 40
CONTROLLING THE MULTIPLE PRODUCT 07. Contrast (Command: k g) 10. Tint (Command: k j) To adjust screen contrast. To adjust the screen tint. You can also adjust the contrast in the Picture menu. You can also adjust the tint in the Picture menu. Transmission Transmission [k][g][ ][Set ID][ ][Data][Cr]...
Page 41
CONTROLLING THE MULTIPLE PRODUCT 13. Remote Lock /Key Lock (Command: k m) 16. Abnormal state (Command: k z) To control Remote Lock on/off to the set. Used to Read the power off status when Stand-by This function, when controlling RS-232C, locks the mode.
Page 42
CONTROLLING THE MULTIPLE PRODUCT 19. Key (Command: m c) 22. Tile V Position (Command: d f) To send IR remote key code. To set the Vertical position. Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [d][f][ ][Set ID][ ][Data][Cr] Data Key code : Refer to ‘IR CODES’. See p.47 Data Min : 00H to Max : 64H * Refer to 'Real data mapping ’.
Page 43
CONTROLLING THE MULTIPLE PRODUCT 26. Natural Mode (In Tile mode)(Command: d j) 29. Fan Fault check (Command: d w) To assign the Tile Natural mode for Tiling function. To check the Fan fault of the Set. Transmission Transmission [d][j][ ][Set ID][ ][Data][x] [d][w][ ][Set ID][ ][Data][x] Data 0 : Natural Off * The data is always FF (in Hex).
Page 44
CONTROLLING THE MULTIPLE PRODUCT 32. Lamp fault Check (Command: d p) 35. Sleep Time (Command: f f) To check lamp fault. Set Sleep Time. Transmission Transmission [d][p][ ][Set ID][ ][Data][x] [f][f][ ][Set ID][ ][Data][Cr] * The data is always FF(in Hex). Data 00 : Off 01 : 10 Acknowledgement...
Page 45
CONTROLLING THE MULTIPLE PRODUCT 38. Language (Command: f i) 41. Power saving (Command: f l) Set the OSD language. To set the Power saving mode. Transmission Transmission [f][i][ ][Set ID][ ][Data][Cr] [f][l][ ][Set ID][ ][Data][Cr] Data 0 : English Data 0 : Off 1 : French 1 : static level 1 2 : German...
Page 46
CONTROLLING THE MULTIPLE PRODUCT 45. H Size (Command : f s) 47. Serial no. (Command: f y) To set the Horizontal size. Check the Serial no. Transmission Transmission [f][s][ ][Set ID][ ][Data][Cr] [f][y][ ][Set ID][ ][Data][Cr] Data : 00H to 64H Data FF (to read the serial numbers) * Refer to 'Real data mapping ’.
EXTERNAL CONTROL DEVICE SETUP IR CODES Code(Hex) Function Note R/C Button R/C Button VOL( ) R/C Button VOL( ) R/C Button POWER ON/OFF R/C Button (Power On / Off) POWER ON Discrete IR Code (Only Power On) POWER OFF Discrete IR Code (Only Power Off) MUTE R/C Button R/C Button...
Page 48
Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.