Panasonic AW-RP120G Operating Instructions Manual page 16

Parts and their functions
 R/B PED dials [R/B PED]
Use these to individually adjust the pedestal of the R channel and
B channel (R PED and B PED) in order to set the desired black
balance.
Turned clockwise : Displays the setting values of the
Turned counterclockwise : Displays the setting values of the
z Pressing these dials displays the current setting values on the LCD
z
panel (3).
 Color adjustment ENABLE button [ENABLE]
Use this to enable or disable operation of the color adjustment
section.
Button indicator on : Operation of the color adjustment section is
enabled.
Button indicator off : Operation of the color adjustment section is
disabled.
z Operating the DETAIL button (K), GAIN button (), PED dial (N),
z
R/B GAIN dials (), and R/B PED dials () switches the LCD
panel display to the corresponding value, but the original value is
redisplayed after approximately 3 seconds.
Indicator section

 IRIS indicator [IRIS]
This indicates the position of the lens iris of the remote camera in
6 levels.
 ZOOM indicator [ZOOM]
This indicates the position of the lens zoom of the remote camera in
6 levels.
 FOCUS indicator [FOCUS]
This indicates the position of the lens focus of the remote camera in
6 levels.
16
(continued)
R PED and B PED on the LCD panel
and changes the value in the plus (+)
direction.
R PED and B PED on the LCD panel
and changes the value in the minus (–)
direction.
 
Menu and memory selection section



 Main mode selection buttons [MENU] [PMEM] [TMEM]
Use these to select the operation mode of the menu and memory
selection section.
Pressing a button turns on the button indicator of only that button and
switches to the corresponding operation mode.
MENU: Switches to the mode for selecting a menu (MENU mode).
⇒ "Basic operations for the menus" (page 20)
PMEM: Switches to the mode for recalling, storing, and deleting
preset memory (PMEM mode).
⇒ "Operating preset memory (PMEM)" in Operations and
Settings (page 13)
TMEM: Switches to the mode for recalling, storing, deleting, and
restoring tracing memory (TMEM mode).
⇒ "Operating tracing memory (TMEM)" in Operations and
Settings (page 18)
 Memory mode selection buttons
[MEM STORE] [MEM DELETE] [RESTORE]
Use these to select any operation from store, delete, and restore
when PMEM or TMEM has been selected with the corresponding
main mode selection button ().
Pressing a button when its indicator is off turns on the button indicator
of only that button and switches to the corresponding operation
mode.
Pressing a button when its indicator is on turns off all three button
indicators and switches to the mode for recalling memory (RECALL
mode).
MEM STORE : Switches to the mode for storing memory (STORE
mode).
MEM DELETE : Switches to the mode for deleting memory (DELETE
mode).
RESTORE : Switches to the mode for restoring tracing memory
(RESTORE mode).
z For details on each mode, refer to the following.
z
⇒ "Operating preset memory (PMEM)" in Operations and Settings
(page 13)
⇒ "Operating tracing memory (TMEM)" in Operations and Settings
(page 18)



