Kenmore 795.6900 Series Use & Care Manual page 18

Remove Hinge Pin Insert on the right side of the
door and reinstall on left side of door.
Fig. 60
Hinge Pin
Insert
Turn refrigerator door upside down on a non-scratch
surface.
Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Fig. 61
Hinge Pin
Insert Bracket
Remove the screw on the opposite side of the door.
This screw is no longer necessary and can be
discarted.
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig. 62
uncover screw holes and place it on the right side.
Fig. 63
REFRIGERATOR INSTALLATION
Hinge Pin
Insert
Remove Washer and set aside.
Using a ¼" socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket.
Fig. 21
Middle Hinge
Bracket
Bolts
Fig. 64
Carefully lift up the freezer door. Remove and place
it on a non scratching surface.
Turn freezer door upside down.
With door upside down, loosen the 2 screws and
remove the Door Closer/Stop.
Fig. 65
Loosen the 2 screws to remove the Bottom Hinge
Pin Insert Bracket with Hinge Pin Insert.
Fig. 66
Hinge Pin
Insert Bracket
Remove the screw on the opposite side of the door.
This screw is no longer necessary and can be
discarded.
Move the Hinge Pin Insert Bracket to the other side
of the door, keeping the same orientation, and push
the Hinge Pin Insert into the hole on the left side of
the bracket. Insert the 2 screws as shown below.
Fig. 67
18
Screws
(2)
Washer
Middle
Hinge Pin
Door Closer/Stop
Hinge Pin
Insert