Kenmore 795.6900 Series Use & Care Manual page 15

HOW TO REVERSE DOOR HANDLE
NOTE: Handle appearance may vary from illustrations
on this page.
• Loosen the 2 set screws with a
wrench and remove the handle.
Fig. 40
Screw
Handle
• Loosen the handle mounting fasteners
with a ¼" hex wrench.
Fig. 41
fastener
•
Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Fig. 42
Plug
button
Install the plug buttons on the left side.
•
Plug
buttons
Fig. 43
REFRIGERATOR INSTALLATION
" hex
3
32
• Install the handle mounting fasteners
on the right side. Turn handle upside down.
Fig. 44
• Install the handle by adjusting handle
footprints to fit mounting fasteners. Tighten
the set screws with a
Fig. 45
15
Handle Mounting
Fastener
" hex wrench.
3
32