Kenmore 795.6900 Series Use & Care Manual page 17

Place freezer door down on Bottom Hinge Pin.
Bottom Hinge Pin
Fig. 52
Reattach Middle Hinge Pin. Replace washer.
Fig. 21
Middle Hinge
Bracket
Bolts
Middle
Fig. 53 Hinge Pin
Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 54
Hinge Pin
Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 55
Tighten Bolts. Force-fit Top Hinge Cover over top
Hinge.
REFRIGERATOR INSTALLATION REFRIGERATOR INSTALLATION
Screws
(2)
Washer
Top Hinge Pin
Fig. 56
REMOVING,REVERSING AND REPLACING
REFRIGERATOR DOORS
(For Freezer Swing Models)
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Failure to
do so could result in death or serious injury.
Remove food and any Adjustable Door or Utility Bins
from doors. Failure to do so could result in serious
injury.
10mm or
13
32
Adjustable wrench
screwdriver and remove.
Fig. 57
Using 10mm or
13
32
the 3 bolts and lift off the Top Hinge. Set parts aside.
Fig. 58
Lift up refrigerator door slightly and remove it.
Fig. 59
17
-inch socket wrench
-inch socket wrench, remove
Hinge Pin