Kenmore 795.6900 Series Use & Care Manual page 20

Change the Hinge Pin from the right side to left side.
Before
Put freezer door down over the Bottom Hinge Pin
on the Bottom Hinge Bracket.
Reattach Middle Hinge Pin using a ¼" socket wrench.
Replace washer.
Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 78
Washer
Middle Hinge
Pin
Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 79
Top Hinge
Pin
Tighten Bolts. Force-fit Top Hinge Cover over Top
Hinge.
Fig. 80
HOW TO REVERSE DOOR HANDLE
NOTE: To assist in installing the handle on the right
side, place a small piece of masking tape near the
top of the handle before removing.
Grasp the handle tightly with both hands and slide the
handle up (this may require some force).
REFRIGERATOR INSTALLATION
After
Fig. 77
Middle Hinge
Bracket
Top Hinge
The keyhole slots on the back of the handle allow
the handle to separate from the mounting screws.
Fig. 81
Key hole
slots on
back
of handle
• Use an adjustable wrench to remove the 2 handle
mounting screws.
Screws
mounted
on door
Fig. 82
To avoid scratching the door. Do not remove the
plug buttons by prying with a screwdriver.
• Unscrew the buttons with your fingers by rotating
counterclockwise; they will loosen and fall free.
Fig. 83
Plug
button
Install the plug buttons on the left side.
•
Plug
Buttons
Fig. 84
• Install the handle mounting screws on the right side.
Fig. 85
20
tape
Screws
mounted
on door
Handle mounting
screws