Philips EM5E AA Service Manual page 101

8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known via the option codes.
You can set the 'hardware related' options via the SAM -
'Alignments' - 'Options' or 'Option Numbers' menu.
Table 8-5 Option overview
Menu-item Subjects
Dual screen PIP / Dual Screen
Text / EPG
NextView type
Picture Tube CRT Type
Picture Rotation
CRT size
Anti Moire filter
Video repro Featurebox type
Lightsensor
2D Combfilter
Picture improvement Yes
Auto Scavem
(WS) Signalling bits Yes
Audio Repro Dolby
Rear speakers
Subwoofer present
Acoustic system
Virtual Dolby
AVL
Miscellaneous Home Cinema
Integrated RC
Tuner type
38.0 IF
Integrated DVD
P50 DVD menu line Yes
Option no. Group 1
Group 2
Electrical Alignments
2
C
Options Physically in the set
Yes Feature present.
None Feature not present.
Yes Feature present.
No Feature not present.
Flashram Flash-RAM present.
No Flashram Flash-RAM not present.
4:3 4:3 picture tube.
16:9 16:9 picture tube.
Yes Frame rotation circuitry present (diagram A5).
No Frame rotation circuitry not present .
28 / 32 / 36 CRT size (in inches).
29 / 34 / 38
Yes Feature present.
No Feature not present.
Eagle not present.
Eagle Eagle present.
Yes Feature present.
No Feature not present.
Yes Feature present.
No Feature not present.
LTP (TOPIC) present.
No LTP (TOPIC) not present.
Yes Feature present.
No Feature not present.
For 16:9 sets
No For 4:3 sets
None Set without Dolby.
Pro Logic Set with Dolby ProLogic.
Corded Passive surroundbox present.
Virtual Virtual Dolby (without rear speakers).
Cordless Wireless active surroundbox present.
Yes Feature present.
No Feature not present.
FL11 'Soft' design (with 'flying saucer' on top of rear cover).
FL12 'Edgy' design with full range speakers (no centre sp.).
PV02 'Edgy' design for 4:3 sets.
Yes Feature present.
No Feature not present.
On Automatic Volume Limiter 'on'.
Off Automatic Volume Limiter 'off'.
Yes Set with Home Cinema Link (EU only)
No Set without Home Cinema Link
Yes Feature present.
No Feature not present.
Philips Set with Philips tuner.
Alps Set with Alps tuner.
Yes For AP PAL-multi set.
No For non AP PAL-multi sets
Yes Feature present.
No Feature not present.
Feature present.
No Feature not present.
Group 1 option code overview.
Group 2 option code overview.
EM5E
You can set the 'software related' options via the SAM - 'Dealer
Options' menu.
After you have changed the option(s), save them via the 'Store'
command.
The new option setting is only active after the TV is switched
OFF and ON again via the mains switch (the EAROM is then
read out again).
8.4.2 Options
Select this sub-menu to set the initialisation codes (= options)
of the set via text menu's.
8. EN 101