Remote Control - Pioneer VSX-D711 Service Manual

Remote control

SOURCE
1
2
DVD TV
MULTI CONTROL
3
RCV CD
1
TEST TONE
4
4
CH SELECT
7
+10
DTV INFO MPX/RETURN
¶
7
5
BAND CLASS
1 ¡
TOP MENU AUDIO
6
REMOTE SETUP STANDARD
7
INPUT SEL.
SIGNAL SEL
8
RECEIVER CONTROL
TUNE
ST
TUNE
TV VOL
9
TV CONTROL
AV PRE-PROGRAMMED
REMOTE CONTROL UNIT
10
RECEIVER
11
VCR CD-R
TUN TVC
2 3
INPUT ATT FL DIMMER
5 6
LEVEL
8 9
EFFECT DISPLAY
DISC
0
ENTER
D.ACCESS T.EDIT/GUIDE
3
8
DTV ON/OFF DTV MENU
4 ¢
SUB TITLE ANGLE
ADV.SURR. STEREO
MIDNIGHT/
MUTE
LOUDNESS
T
ST
12
ENTER
13
CHANNEL
MENU
MASTER VOLUME
TV INPUT
14
TV
15
1 SOURCE
Press to turn on/off other components connected to the receiver.
2 MULTI CONTROL buttons
Press to select control of other components (see Controlling the
Rest of Your System).
3 RCV
Switches the remote to controls the receiver (used to select the
features above the number buttons. (ex. INPUT ATT, FL. DIMMER).
Also use this button to set up surround sound.
4 Number buttons/Receiver controls/ENTER
Use the number buttons to directly select a radio frequency or the
tracks on a CD, DVD, etc.
DISPLAY/DISC (ENTER)
The button's use depends on the
component selected. It can be used to switch the display
between the station preset name and the frequency for the
tuner, enter commands for TV or DTV, and can also be used to
select a disc in a multi-CD player.
Receiver Controls
Press the RCV button first to access the functions above the
number buttons. The display flashes when it isn't possible to
use a function.
TEST TONE
Sounds the test tone when setting up the surround sound of
the receiver.
INPUT ATT
Attenuates (lowers) the level of an analog input signal to
prevent distortion (when the overload indicator lights).
FL DIMMER
Dims or brightens the display.
CH SELECT
Selects a speaker when setting up the surround sound of the
receiver.
LEVEL +/–
Adjusts the levels of the surround sound of the receiver.
EFFECT +/– buttons
Adds or subtracts the amount of effect with different advanced
listening modes (except 5 or 6 Ch Stereo and Virtual SB).
5 Component/Tuner controls
The main buttons (3, 7, etc.) are used to control a component after
you have selected it using the MULTI CONTROL buttons. The tuner/
DTV controls above these buttons can be accessed after you have
selected the corresponding MULTI CONTROL button (TUNER or
DVD (when connected to DTV)).
DTV INFO
Use to bring up information screens on a digital TV.
MPX/RETURN
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to mono will
improve the sound quality. Also acts as a stop button for CDs,
tapes, or DVDs.
VSX-D711
81