Chapter 1. General Description; Specifications; Life Of Consumable - Sharp FO-DC600 Service Manual

FO-DC600U

CHAPTER 1. GENERAL DESCRIPTION

[1] Specifications

• GENERAL
Automatic dialing:
Memory size* :
Modem speed:
Transmission time* :
Toner cartridge yield:
(continuous printing,
4% page coverage,
letter paper)
Drum cartridge yield:
Resolution:
Halftone (grayscale):
Automatic document feeder: Letter paper (20 lb): Max. 50 pages
Paper capacity:
Compression scheme:
<IMPORTANT PLEASE READ FIRST>
To avoid problems with supplies, please don't use supplies from other units. Please use new supplies, when supply changes are required.

[2] Life of consumable

Section
Toner cartridge
Drum cartridge
Paper feed
Fuser
Paper transport
Conventional Auto Dialing:
Rapid Key Dialing: 59 numbers
Speed Dialing: 200 numbers
Personal Auto Dial Books: 40 books
(59 Rapid Keys, 16 Speed Dial
numbers per book)
16 MB (approx. 1,000 pages)
Optional memory: FO-8MK (8 MB;
approx. 500 pages)
33,600 bps (max.) with automatic
fallback to lower speeds
Approx. 2 seconds
Initial starter cartridge (included with
fax machine): Approx. 3000 pages
Replacement cartridge (FO-50ND):
Approx. 6000 pages
Initial starter cartridge (included with
fax machine): 20,000 pages (avg.)
Replacement cartridge (FO-47DR):
20,000 pages (avg.)
Standard: 203 x 98 lines/inch
(8 x 3.85 lines/mm)
Fine/Halftone: 203 x 196 lines/inch
(8 x 7.7 lines/mm)
Super fine: 203 x 391 lines/inch
(8 x 15.4 lines/mm)
Ultra fine: 406 x 391 lines/inch
(16 x 15.4 lines/mm)
64 levels
Legal paper: Max. 20 pages
(Note: 11" x 17" paper must be loaded
one page at a time.)
750 sheets (20 lb)
(500-sheet cassette available as option)
MMR, MR, MH, Sharp (H2), JBIG
Part
Replacement cartridge
(FO-50ND)
Replacement cartridge
(FO-47DR)
Transfer roller (Refer to the P/G No. 10-8)
(0KW4127410302)
Fusing unit (Refer to the P/G No. 9-14)
(0KW4127035501)
Paper transfer roller (Refer to the P/G No. 8-6)
(0KW4127300101)
Applicable telephone line:
Compatibility:
Printing resolution:
Input document size:
Effective scanning width:
Effective printing width:
Printing speed:
Reception modes:
Instascan speed:
Full Dual Access:
Copy function:
Power requirements:
Operating temperature:
Humidity:
Power consumption:
Dimensions:
Weight:
* Based on ITU-T Test Chart #1 at standard resolution, excluding time for
protocol signals (i.e., ITU-T phase C time only).
Estimated Life
6,000 prints
(at Letter/4% chart)
20,000 prints
(at Letter/4% chart)
50,000 prints
50,000 prints
Cleaning as needed
1 – 1
Public switched telephone network
ITU-T (CCITT) G3 mode, Super G3
mode
Horizontal: 406 dots/inch (16 dots/mm)
Vertical: 391 lines/inch (15.4 lines/mm)
600 x 600 dpi (Network Print: FO-NP1)
Automatic feeding:
Width: 5.8 to 10.1" (148 to 256mm)
Length: 5.0 to 14.3" (128 to 364 mm)
Manual feeding:
Width: 5.8 to 11.0" (148 to 279 mm)
Length: 5.0 to 19.0" (128 to 483 mm)
10.1" (256 mm) max.
8.0" (203 mm) max.
16 ppm
Auto/Manual
1.3 sec/page (letter paper; scan time
only, excludes document feeding time)
Yes
Single/Multi/Sort (99 copies/page)
120 V AC, 60 Hz
50 - 86 F(10 - 30 C)
20 to 85 % RH
Stand-by: 9 W
Stand-by(all options installed: 16W
Maximum: 800 W
Width: 21.5" (546 mm)
Depth: 16.2" (412 mm)
Height: 17.0" (431 mm)
(Not including paper tray or attachments)
Approx. 48.5 lbs. (22.0 kg)
(Not including supplies paper tray or
attachments)
Replaced by
User
User
Service Engineer
Service Engineer
———————