Before You Begin
For complete information of the product,
refer to the User's Manual (in PDF format)
on your Window's desktop or Driver Disc
(if provided).
You can download the latest manual and
drivers by accessing the Getac web link at
http://www.getac.com Support
Download. In case you are unable to down-
load the manual file and/or driver file, contact
your authorized dealer for assistance.
Getting the Computer
Running
Installing the Battery Pack
Install the battery pack if it has not been
installed in your computer.
1. Locate the battery compartment on the
right side of the computer.
2. Slide the latch toward the right to unlock
(
) and then push down the latch to
release the cover.
3. With the strip facing outward, insert the
battery pack all the way into the
compartment.
4. Close the cover. When closing, engage the
latch and then slide the latch toward the
left to lock (
).
Connecting to AC Power and
Starting Up
The first time you use your computer, use the
AC adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the computer (
2. Plug the female end of the AC power cord
to the AC adapter and the male end to an
electrical outlet (
).
3. Press the power button (
the computer. The operating system such
as Windows should start.
Charging the Battery
To charge the battery, connect the AC
adapter to the computer and an electrical
outlet. The Battery Charge Indicator (
the computer glows amber to indicate that
charging is in progress. When the battery is
fully charged, the Battery Charge Indicator
glows green.
It takes approximately 4 hours to fully charge
the battery when the computer is off and
approximately 7 hours when the computer is
on.
).
) to start up
) on
1