Arctic Cat Diesel SD 700 2011 Service Manual page 120

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
4. Pump up the hand brake; then engage the brake
lever lock.
5. Remove the cotter pin securing the hex nut; then
remove the hex nut and washer.
6. Release the brake lever lock.
NOTE: It is not necessary to remove the brake
hoses from the calipers for this procedure.
7. Remove the two brake calipers. Account for the
four cap screws.
8. Remove the tie rod cotter pins and discard the
pins.
9. Remove the tie rod lock nuts.
10. Remove the upper ball joint cap screws taking care
not to strip the threads on the ball joint shaft; then
using a rubber mallet, tap the end of the axle and
free it from the knuckle assembly.
KX041
11. Pull the steering knuckle away from the axle.
AF894D
12. Support the axle to not allow it to drop or hang.
The axle must be supported. If the axle is allowed to
drop or hang, damage to the inner CV joint may
occur.
13. Remove the lower shock bolts. Account for the
lock nuts; then move the shocks aside and secure
AF895D
them with a strap.
www.mymowerparts.com
Manual
Table of Contents
CAUTION
AF896D
AF628D
KX151
119