Note : Follow the installation procedure in the numerical order given.
1 Align the pointer with the groove of front cabinet and insert it as shown in the illustration.
2 Align Tuning knob with front cabinet and fasten the screw.
3 Turn the Tuning knob in the direction of the arrow as shown in the illustration until pointer agrees with scale " 0 " (at leftmost end of
scale).
4 Turn the tuning capacitor gear fully in the direction of the arrow as shown in the illustration.
5 Fasten the front cabinet and rear cabinet with the screws.
DIAL POINTER INSTALLATION
Front Cabinet
5
3 Tuning knob
SECTION 4
1 Pointer
Tuning knob B
2 Screw (2.6
8)
4 Tuning capacitor gear
— 9 —
Rear cabinet