Installation Of A 3.5" Device - Sharkoon Tauron Manual

10. Installation of a 3.5" device

1. Remove the case's front panel by gently pulling it towards you.
2. Dismantle the 3.5" front bezel by removing it from the front panel (fig. 17).
Fig. 17
3. Unlock the quick fasteners, which attach the mounting frame for 3.5" devices inside the case (fig. 18a)
and remove the mounting frame from the case (fig. 18b).
Fig. 18a
(Carefully remove an optionally present metal bezel covering the 3.5" drive bay by using a gripper.)
Fig. 18b
Tauron

19