Advertisement
Included in the box
ColorBlast TRX fixture with accessory holder
and 6 ft (1.8 m) power cable
Frosted glass 23° lens
Clear glass 10° lens
(4) 6-32 stainless steel screws for lens bezel installation
3/32 in hex key wrench for fixture tilting and locking
Snap-on ferrite core for advanced EMI suppression
Installation Instructions
Color scroller cables
14 AWG power / 22 AWG data
175 ft (53.3 m) per port
The number of ColorBlast TRX fixtures that each power / data supply can
support is determined by the such factors as the supply's capacity and number
of available ports. The PDS-750 TRX, for example, offers power / data ports for
connecting up to 12 ColorBlast TRX fixtures simultaneously.
2. On an architectural diagram or other diagram that shows the physical layout of
the installation, identify the locations of all switches, controllers, power / data
supplies, fixtures, and cables.
Unpack Fixtures
1. Carefully inspect the box containing ColorBlast TRX and the contents for any
damage that may have occurred in transit.
2. Each ColorBlast TRX fixture comes pre-programmed with a unique serial number.
As you unpack the fixtures, record the serial numbers in a layout grid (typically a
spreadsheet or list) for easy reference and light addressing.
2. Assign each fixture to a position in the lighting design plan.
3. To streamline installation and aid in light show programming, you can affix a label
identifying the order or placement in the installation to an inconspicuous location
on each light fixture's housing.
18 AWG power / 18 AWG data
PDS 750 TRX
ColorBlast TRX
XLR patch cables
75 ft (22.9 m) per port
7
Product Guide
Advertisement
