Advertisement
Locking and Unlocking Menus
For security, the ColorBlast TRX menu times out and locks after a short period of
inactivity. When locked, the readout briefly displays LOCK when a button is touched,
then displays the starting DMX address if in DMX mode, or FIXD if in standalone
mode.
To unlock the ColorBlast TRX menu:
►
Press and hold the Return and Down buttons until the menu responds (displays
▪
ADDR or FIXD).
To set the ColorBlast TRX menu unlock time:
►
1.
Select UTIL > UNLK, then 1, 2, or 5, depending on how many seconds you want
a user to hold Return and Down before the menu unlocks.
2.
Press Enter to confirm your selection.
Displaying and Setting Fixture Mode
ColorBlast TRX can work in either DMX mode or standalone mode. When in DMX
mode, ColorBlast TRX responds to DMX data input from a controller or power /
data supply. In standalone mode, ColorBlast TRX ignores any DMX data and displays
a fixed color. You can set the fixed color by entering a brightness value (0 – 255) for
each of the fixture's five channels (red, green, blue, amber, and white).
To display the fixture's current mode:
►
With the fixture locked, press any button.
▪
If in standalone mode, LOCK briefly displays, followed by FIXD.
If in DMX mode, LOCK briefly displays, followed by the fixture's starting DMX
address (1 – 512).
To put a fixture in DMX mode:
►
1.
Select MODE, then DMX.
2.
Press Enter to confirm your selection.
To put a fixture in standalone mode and set the fixed color to display:
►
1.
Select MODE, then FIXD.
2.
To set the fixed color to display, enter brightness settings for the red, green,
blue, amber, and / or white channels.
For instance, to set the brightness for the green channel, select GRN, select a
brightness level (0 – 255), then press Enter.
ColorBlast TRX
Product Guide
17
Advertisement
