Philips ColorBlast TRX User Manual page 12

Using ColorBlast TRX Without
the Accessory Holder
If you're not planning to use spread lenses or accessories, you can remove the
accessory holder and secure the lens bezel to the fixture housing using the four
included stainless steel screws,
1. Using a flathead screwdriver, remove the lockdown screws from the four corners
of the accessory holder.
2. Remove the accessory holder from the fixture housing.
3. Secure the lens bezel directly to the fixture housing using the four included 6-32
Phillips head stainless steel screws.
12
ColorBlast TRX Product Guide
(Optional)