Software Upgrade Method - Daewoo DP-42GM Service Manual

7. SOFTWARE UPGRADE Method

1. Connect the JACK PCB to the Video PCB.
2. Connect 9 PIN serial cable to the computer s serial port.
3. Connect serial cable s opposite end to Jack PCB s RS-232C port.
4. Run PC s Flashupgrader.exe and then push Next(N) > button.
5. Select current Upgrade file
- Copy files sent by research center to a folder you wish to copy.
- Browse and Select pwSDK.inf from the folder.
- Push Next(N) > button.
-43-