Table of Contents
Advertisement
IMPORTANT:After closing, only one of the two white lines on the FFC should be visible, and should be flush
with the edge of the locking mechanism.
4.
Insert the Touchscreen FFC into the connector and close the FFC locking latch as shown
IMPORTANT:After closing, only one of the two white lines on the FFC should be visible, and should be flush
with the edge of the locking mechanism.
5.
Adhere the tape to secure the Touchscreen FFC to the connector.
6.
Adhere the tape to secure the Touchwheel FFC to the connector.
Chapter 3
45
Advertisement
Table of Contents
