Replacing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power-adapter port into the socket on the palm rest.
2
Connect the power-adapter port cable to the system board.
3
Slide the ports on the system board into the slots on the palm rest and
place the system board on the palm rest.
4
Replace the screws that secure the system board to the palm rest.
Post-requisites
1
Replace the
display
2
Replace the
status light
3
Replace the
I/O
4
Replace the speakers.
5
Replace the
base
6
Replace the keyboard.
7
Replace the fan.
8
Replace the
hard
9
Replace the battery.
10 Replace the
base
Computer. After working inside your
assembly.
board.
board.
frame.
drive.
cover.
After Working Inside Your
73