Sony DSC-HX400 Help Manual page 119

3. Check the composition of the image on the smartphone screen, and then press the shutter
button (A) on the smartphone to shoot an image.
Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check].
Note
This product shares the connection information for [Smart Remote Embedded] with a device
that has permission to connect. If you want to change the device that is permitted to connect
to the product, reset the connection information by following these steps. MENU →
(Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register
the smartphone again.
Depending on future version upgrades, the operational procedures or screen displays are
subject to change without notice.
[144] How to Use
One-touch connection with an NFC-enabled Android
smartphone (NFC One-touch remote)
You can connect this product and an NFC-enabled Android smartphone with one touch, without
performing a complex setup operation.
1. Activate the NFC function of the smartphone.
2. Switch this product to shooting mode.
The NFC function is available only when the
3. Touch the product to the smartphone.
Using Wi-Fi functions Controlling this product using a Smartphone
(N mark) is displayed on the screen.