Smart Remote Embedded - Sony DSC-HX400 Help Manual

that works with the smartphone, the product and the smartphone will be connected via Wi-Fi. To
use this function, register the desired application in advance.
1. MENU → (Wireless) → [One-touch(NFC)] → desired application.
2. Switch this product to shooting mode, then touch an NFC-enabled smartphone to the
(N mark) on the product for 1-2 seconds.
PlayMemories Mobile launches on the smartphone, and the application you have
registered launches on this product.
Note
When the product is in playback mode, the registered application will not launch even if you
touch the smartphone to the product.
When you call up an application with one touch, even if that application does not work with a
smartphone, PlayMemories Mobile on smartphone will launch. Exit PlayMemories Mobile
without performing an operation. If you do not exit PlayMemories Mobile, the smartphone
stays in standby connection status.
[143] How to Use

Smart Remote Embedded

You can use a smartphone as the remote controller for this product, and shoot still images. Still
images shot via remote control are sent to the smartphone from the product. The application
PlayMemories Mobile must be installed on your smartphone.
1. MENU →
2. When the product is ready for the connection, an information screen appears on the
product. Connect the smartphone and the product using that information.
Connection setting methods differ among smartphones.
Using Wi-Fi functions
(Application) → [Application List] → [Smart Remote Embedded].
Controlling this product using a Smartphone