Gps Auto Time Cor. (Dsc-Hx400V); Gps Auto Area Adj. (Dsc-Hx400V) - Sony DSC-HX400 Help Manual

It may take from ten seconds to several minutes to acquire the location information when you
turn on this product. If you shoot images before the product acquires the location information,
the information is not recorded on the images. To record a correct location information, first
make sure the product receives the GPS signal, then shoot the images.
During take off and landing of an airplane, set [Airplane Mode] to [On].
Use GPS in accordance with the regulations of the countries or regions where you use the
product.
[111] How to Use

GPS Auto Time Cor. (DSC-HX400V)

The product acquires the time information using GPS while the product is turned on, and the
information is used for maintaining the accurate time setting. The product adjusts the time
setting when it is turned off.
1. MENU →
Menu item details
On:
Uses GPS auto time correction.
Off (default setting):
Does not use GPS auto time correction.
Note
[GPS Auto Time Cor.] is not available when [GPS On/Off] is set to [Off].
Before using the [GPS Auto Time Cor.] function, set [Date/Time Setup].
The corrected time may differ from the actual time for a few seconds.
[GPS Auto Time Cor.] may not activate correctly in some areas.
[112] How to Use

GPS Auto Area Adj. (DSC-HX400V)

Corrects the time difference automatically if the product detects the difference by acquiring
current location information via the GPS system.
Changing settings
(Setup) → [GPS Settings] → [GPS Auto Time Cor.] → desired setting.
Changing settings
Setup menu
Setup menu