The Product Does Not Work Properly - Sony DSC-HX400 Help Manual

aside for 24 hours or more with the power left off.
[244] Troubleshooting
The number of recordable images does not decrease, or
decreases two images at a time.
This is because the compression rate and the image size after compression change
depending on the image when you shoot a JPEG image.
[245] Troubleshooting

The product does not work properly.

Turn off the product. Remove the battery pack and insert it again. If the product is hot,
remove the battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-UD10/AC-UD11 AC Adaptor (sold separately) is used, disconnect the power cord.
Connect the power cord and turn on the product again. If the product repeats the same error
often or still does not work after trying these solutions, consult your Sony dealer or local
authorized Sony service facility.
[246] Troubleshooting
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function on this
product is working. The last two digits (indicated by □□) will differ depending on the state of this
product.
If you cannot solve the problem even after trying the following corrective actions a few times,
this product may need repair. Contact your Sony dealer or local authorized Sony service facility.
C:32:□□
C:95:□□
There is trouble with the product's hardware. Turn the power off and on again.
Troubleshooting
Troubleshooting
Messages Messages
Others
Others