Flash Comp; Switching The Screen Display (Shooting) - Sony DSC-HX400 Help Manual

[31] How to Use

Flash Comp.

Adjusts the amount of flash light in a range of –2.0 EV to +2.0 EV.
Flash compensation changes the amount of flash light only. Exposure compensation changes
the amount of flash light along with the change of the shutter speed and aperture.
1. MENU →
Selecting higher values (+ side) makes the flash level higher, and lower values (– side)
makes the flash level lower.
Note
The higher flash effect may not be visible due to the limited amount of flash light available, if
the subject is outside the maximum range of the flash. If the subject is very close, the lower
flash effect may not be visible.
[32] How to Use

Switching the screen display (Shooting)

You can change the display contents on the screen.
1. Press the DISP (Display Setting) button.
Each time you press the DISP button, the recording information display changes as
follows:
Graphic Display → Display All Info. → No Disp. Info. → Histogram → Level → Graphic
Display
Graphic Display
Display All Info.
Using shooting functions
(Camera Settings) → [Flash Comp.] → desired setting.
Using shooting functions
Using the flash
Selecting a screen display mode