Security Menu - Lexmark MX310 Series User Manual

Understanding printer menus
Use
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
Device‑Initiated E‑mail
None
Use Device SMTP Credentials
Device Userid
Device Password

Security menu

Security Audit Log menu
Use
Export Log
Delete Log
Yes
No
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7
To
Specify the type of user authentication required for scan to e‑mail
privileges.
Note: "No authentication required" is the factory default setting.
Specify what credentials will be used when communicating to the SMTP
server.
Notes:
•
None is the factory default setting for Device‑Initiated E‑mail.
• Device Userid and Device Password are used to log in to the SMTP
server when Use Device SMTP Credentials is selected.
To
Let an authorized user export the audit log.
Notes:
•
To export the audit log from the printer control panel, a flash drive must be
attached to the printer.
•
The audit log can be downloaded from the Embedded Web Server and saved
on a computer.
Specify whether or not audit logs are deleted.
Note: Yes is the factory default setting.
Specify how and whether or not audit logs are created.
Notes:
•
Enable Audit determines if events are recorded in the secure audit log and
remote syslog. No is the factory default setting.
•
Enable Remote Syslog determines if logs are sent to a remote server. No is the
factory default setting.
•
Remote Syslog Facility determines the value used to send logs to the remote
syslog server. 4 is the factory default setting.
• If the security audit log is activated, then the severity value of each event is
recorded. 4 is the factory default setting.
115