Playback From A Second Source - Bowers & Wilkins Zeppelin Owner's Manual

Playback from a second source

You can switch between the iPod/iPhone and a
second (AUX) source by using the
remote handset or by pressing and holding the
combination button on the top of Zeppelin itself.
See the tables below for details.
3 SEC
When AUX is selected, Zeppelin's LED glows green.
button on the
The play/pause button on Zeppelin's remote
handset toggles mute on and off. The fast forward
and fast reverse buttons have no effect.
If Zeppelin is manually switched to standby and
on again, it automatically selects the last used
source. If that source is no longer connected,
Zeppelin will switch to the alternative. If no source
at all is connected, Zeppelin will return to standby
after 5 minutes. Your iPod/iPhone only overrides
source selection as it is docked or if you press its
own Play button while it is docked.
15