Sony DVP-S500D Service Manual page 10

7-6. Note on Mounting TK-47 Board
1) Align two bosses. (See Fig. 13)
2) Align four tabs. (See Fig. 13)
3) Fix the board securely with 3 screws (BV3 10). (The sensor
will not function normally if the board floats up.)
TK-47 board
Two claws
Boss
Fig. 13
7-7. Note on connecting OPT Harness
1) The optical pick-up could be destroyed unless the OPT har-
ness is connected normally to the connector. (See Fig. 14)
Good NG
Connector
Fig. 14
Three screws
(BV3 10)
Boss
Two claws
OPT harness
– 10 –