Calibration - Optoma DP-3515 Serivce Manual

Delta Elec. Inc.

6. Calibration

Step of into Service Mode
Step 1 : To turn on the projector, press the Power button on the keypad or IR controller,
. Until the "Power Off? Press Power again" message appears.
Step 2 ： Then press "Left"=>"Right"=>"Down"=>"Up" button on the keypad or IR controller.
Step 3 ： If password is correct then go into Service Mode 。
Company Confidential
68
EP7155i & EP1691i
Optoma_______________________
ver.00
Delta____________
2008/12/24