3. Programming
(1) Key in the serial number into the
barcode blank space.
(2) In "Write Source Select", make a
check in "Analog".
(3) Click "Program".
4. When the message "Please change
the cable to Analog" is shown on the
screen, click "OK" button.
5. When the EDID program is completed,
a message "OK" will appear on the screen.
6. Select ''Trans'' in the read item, and then
click ''Read'' button, EDID informations will
show the result.
(1)
(3)
(2)
PK-102
Confidential
6-4