5-2 Setup Procedure
1. Connect all ports
- Disassemble the Battery Cover and
remove the Battery.
- Connect RS232 P2 Port to P3 Port of
Generic Fixture
- Connect J17 Port of Generic Fixture and
P1 port of Projector by FPC Cable
- Connect CN2 Port of Generic Fixture to the
Power adapter for generic fixture.
- Connect '' DC IN '' Port of the Projector
to the Power adapter for projector.
Note1: As the red square 1, the switch of 1 and
2 are ''on'' state , the switch of 3 and 4 are
''off'' state;
As the red square 2, the switch of 1, 2, 3, 4
are all ''on'' state.
Note2: Plug in the power, then the LED will
flashing red.
Generic Fixture
RS232 Cable
J17
P2 P3
CN2
1
2
PK-102
Confidential
P1
DC IN
5-2