Step 2: Install the Radio Connector Module and Radio
Dock Adapter
In this step, you will install the Radio Connector Module, if necessary, and
Radio Dock Adapter, according to the combination for your Radio which you
determined from the previous step.
• Combination 1: Skip this step. The adapter and module are already
installed in the Portable Speaker Dock.
• Combination 2: You will remove the pre-installed adapter, remove
the pre-installed module, install Radio Connector Module B, and install
Radio Dock Adapter SXM2.
• Combination 3 & 4: You will remove the pre-installed adapter, and
install the Radio Dock Adapter for your Radio. Skip step 2B.
21