Installation; Step 1: Identify The Radio Dock Adapter And Radio Connector Module; Combination For Your Radio - Sirius XM RAdio portable speaker dock User Manual

Portable speaker dock
Hide thumbs Also See for portable speaker dock:
Table of Contents

Advertisement

Installation

There are several steps to setting up your Portable Speaker Dock. Let's
begin with identifying the correct Radio Dock Adapter and Radio Connector
Module for your particular Radio.
Step 1: Identify the Radio Dock Adapter and Radio
Connector Module Combination for your Radio
There are four Radio Dock Adapters included with your Portable Speaker
Dock, which are designed to align your particular Radio with the Portable
Speaker Dock's connector, and to provide support for your Radio while it is
in the dock. Please note that Radio Dock Adapter XM/SXM1 is pre-installed
in the Portable Speaker Dock.
There are also two Radio Connector Modules included with your Portable
Speaker Dock, which provide the correct connector for your particular
Radio. Please note that Radio Connector Module A is pre-installed in the
Portable Speaker Dock.
Both the Radio Dock Adapters and the Radio Connector Modules have
a sticker affixed on the bottom which identifies them. Turn them over to
identify them.
The four combinations of the Radio Dock Adapters and Radio Connector
Modules are shown on the next four pages, with the Radios each
combination supports. Find the correct combination for your Radio in step
1, note the adapter and module you will use, and then go to step 2 to install
them.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bb2Sxabb2

Table of Contents