Settings - Honeywell CHRONOTHERM T8600D Product Data

T8600D, T8601D AND T8602D CHRONOTHERM
A.
ENGAGE TABS AT TOP OF THERMOSTAT AND WALLPLATE.
B.
PRESS LOWER EDGE OF CASE TO LATCH.
Fig. 5. Mounting thermostat on wallplate.
SET WAKE TIMES
AND SETPOINTS
INCREASE TIME SETTING
OR SCROLL FORWARD
THROUGH INSTALLER SETUP
AND SYSTEM TEST
SET CURRENT
DAY AND TIME
RETURN TO
NORMAL
OPERATIONS
ENTER
INDEFINITE
OR TIMED
HOLD MODE
SET CURRENT OR
PROGRAM DAY
CHANGE BETWEEN
DAYLIGHT SAVINGS
AND STANDARD TIME
COPY ONE PROGRAMMED
DAY TO ANOTHER DAY
68-0164—1
IV DELUXE PROGRAMMABLE THERMOSTATS
®
M15043
SET LEAVE TIMES
AND SETPOINTS
Time
Run Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp
Day

Settings

Daylight
Copy
Time
Fig. 6. Key locations and descriptions.
SETTINGS
Using Thermostat Keys
The thermostat keys are used to:
• set current day and time,
• program times and setpoints for heating and cooling,
• temporarily override program temperatures,
• display present setting,
• configure Installer Setup,
• check System Test,
• display outdoor temperature (select models),
• set the system operation,
• set the fan operation.
See Fig. 6 for the location of the keys.
System and Fan Settings
The system default setting is Heat and the fan default setting
is Auto. Use the System and Fan keys to change the settings.
See Fig. 7. The fan settings can be set for each program
period individually. The system selection is for all the program
periods.
SET RETURN TIMES
AND SETPOINTS
Set Program
Leave Return Sleep
System Fan
CHANGE BETWEEN
HEATING AND COOLING
SETPOINTS
DECREASE TIME SETTING
OR SCROLL BACKWARD
THROUGH INSTALLER
SETUP AND SYSTEM TEST
6
INCREASE TEMPERATURE
SETTING OR SCROLL
FORWARD THROUGH
INSTALLER SETUP OPTIONS
DECREASE TEMPERATURE
SETTING OR SCROLL
BACKWARD THROUGH
INSTALLER SETUP OPTIONS
DISPLAY INFORMATION
SUCH AS PRESENT
SETTINGS AND OUTDOOR
TEMPERATURE
SET SLEEP
TIMES AND
SETPOINTS
SELECT FAN
OPERATION
SELECT SYSTEM
OPERATION
M10405A