Setting Temporary Temperatures - Honeywell CHRONOTHERM T8600D Product Data

T8600D, T8601D AND T8602D CHRONOTHERM
3. Press Copy.
Copy
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
4. Press Day until the day to be copied to is displayed.
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Day
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
5. Press Copy.
NOTE: donE will be displayed for two seconds and
then the normal program display will be
shown.
Copy
Time Set Program
Set Current
Run Leave
Wake Return
Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
6. Repeat steps 2 through 5 for all the days desired.
7. Press Run Program.
Clearing Program Period
NOTE: The thermostat must be in the program mode to use
the clear feature. Go to step 2 if the thermostat is
already in the program mode.
1. Press Wake, Leave, Return or Sleep.
Time Set Program
Run Set Current
Leave Wake Leave Return
Day/Time
Program
Heat/Cool
Hold Temp Day System
Settings
Daylight Copy
Time
2. Press Day until the desired day is displayed.
Time Set Program
Run Set Current
Wake Leave Return
Day Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
3. Press Leave, Return or Sleep until the start time and
temperature setting are cleared (approximately 3
seconds).
NOTE: Wake cannot be cleared.
Time Set Program
Run Set Current
Wake Leave
Leave Day/Time Return
Program
Heat/Cool
Hold Temp Day System
Settings
Daylight Copy
Time
68-0164—1
®
Mon
Sleep
Fan
M10326
Mon Wed
Sleep
Fan
M10327
Sleep
Fan
M10328
Set Program Start Time Setting
AM
Mon Heat
Sleep
Leave
System Fan
Fan
Heat Auto
M10329
Setting
Set Program Start Time
AM
Sat Heat
Sleep
Leave
System Fan
Fan
Heat Auto
M10330
Set Program Start Time Setting
Sat Heat
Sleep
Leave
Fan
M10331
IV DELUXE PROGRAMMABLE THERMOSTATS
4. Repeat steps 2 and 3 for all the periods to be cleared.
5. Press Run Program.

Setting Temporary Temperatures

Changing Temperature Setting Until the Next
Program Period
Press increase or decrease
temperature setpoint is displayed.
NOTE: If or appear under the temperature display, it
means that both the heating and cooling setpoints
are being adjusted. Tapping the key will change both
the heat and cool setpoints by one degree. Press i
after the desired setpoint is reached to check the
setpoints.
Time
Run Set Current
Program Day/Time
Hold Temp
Day
Daylight Copy
Time
NOTE: The temporary temperature setting is displayed for
approximately 3 seconds. The setting is canceled
when the next period starts or when Run Program is
pressed.
Changing Temperature Setting Indefinitely
1. Press Hold Temp.
Run Set Current
Hold Temp Program Day/Time
Hold Temp Day
Daylight
Time
2. Press increase
setting, if desired.
Time
Run Set Current
Program Day/Time
Hold Temp Day
Daylight
Copy
Time
3. Press Heat/Cool Settings to change between heat and
cool settings.
Heat/Cool
Run Set Current
Program Day/Time
Settings
Hold Temp Day
Daylight
Time
4. Press increase
temperature settings.
Time
Run Set Current
Program Day/Time
Heat/Cool
Hold Temp Day
Daylight Copy
Time
14
key until the desired
Temporary Setting
Set Program
Heat
Wake Leave Return Sleep
Wake
Heat/Cool
System Fan
Settings
Time Set Program
Wake Leave Return Sleep
Heat/Cool
System Fan
Settings
Copy
or decrease key to change the
Set Program
Heat
Wake Leave Return Sleep
Heat/Cool
System Fan
Settings
Time Set Program
Leave
Wake Return Sleep
Heat/Cool
System Fan
Settings
Copy
or decrease key to adjust
Set Program
Leave
Wake Return Sleep
System Fan
Settings
M10332
Setting
Heat
M10333
Setting
M10334
Setting
Cool
M10335
Setting
Cool
M10336