Download  Print this page

Thermostat Information; Programming - Honeywell CHRONOTHERM T8600D Product Data

Deluxe programmable thermostats
Hide thumbs

Advertisement

T8600D, T8601D AND T8602D CHRONOTHERM
NOTE: Press any key and the numbers will change on the
display. Press Time
to scroll forward. The Run Program, Key will not
exit from this test. To exit, go to a different test and
press Run Program.

THERMOSTAT INFORMATION

1. Press the Time
key to access the thermostat
information.
2. Press the increase
code. The first two large digits are the month and the
third digit is the last digit of the year (Example:
027=February 1997).
3. Press the increase
identification code. (Example: 02 = software ID code 2)
4. Press the increase
revision number (Example: 001=Revision number 1).
5. Press the increase
identification code. (Example: 314 = EEPROM ID 314)
6. Press the Run Program key to exit the system test. The
system test times out after five minutes without any key
presses.
®
to scroll backwards and Time
M4934
key to display the production date
M10351
key again to display the software
M4932A
key again to display the software
M10229
key again to display the EEPROM
M4933A
IV DELUXE PROGRAMMABLE THERMOSTATS

PROGRAMMING

The keyboard is located behind the thermostat cover with
three frequently used keys by the display. The thermostat
display shows day, time, program period, temperature, system
and fan operation selection.
The thermostat can be set for four times and up to eight
temperatures for each day of the week (28 independent time
and 56 temperature settings). The
quick temporary temperature changes to increase comfort.
The Hold Temp key provides energy efficient operation for
extended periods of time.
Before starting the programming procedure, use Table 9 to
organize the program schedule. The factory preprogrammed
time, temperature and fan settings are shown in brackets. If a
daytime energy savings period is not used, press the period
key (Leave or Return) until the time is blank. The fan setting
feature is available on select thermostat models.
Setting the Current Day and Time
IMPORTANT
Always press the keys with your fingertip or similar
blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.
1. Press Set Current Day/Time.
NOTE: On initial power up or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
Set Current
Run
Set Current
Program
Day/Time
Day/Time
Hold Temp
Day
Daylight
Time
2. Press Day until the current day is displayed.
NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday,
Wed = Wednesday, Thu = Thursday, Fri =
Friday, Sat = Saturday.
Set Current
Run
Program
Day/Time
Day
Hold Temp
Day
Daylight
Time
3. Press Time
displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
Time
Run
Set Current
Day/Time
Program
Hold Temp
Day
Daylight
Time
11
and
keys provide
Set Day/Time
PM
Time
Set Program
Mon
Wake
Leave
Return
Sleep
Heat/Cool
System
Fan
Settings
Copy
Set Day/Time
PM
Time
Set Program
Tue
Leave
Wake
Return
Sleep
Heat/Cool
System
Fan
Settings
Copy
or Time
until the current time is
Set Day/Time
AM
Time
Set Program
Tue
Wake
Leave
Return
Sleep
Heat/Cool
System
Fan
Settings
Copy
M10312
M10313
M10314
68-0164—1

Hide quick links:

Advertisement

loading

  Also See for Honeywell CHRONOTHERM T8600D

  Related Manuals for Honeywell CHRONOTHERM T8600D