Installer Self-Test; Installer System Test - Honeywell CHRONOTHERM T8600D Product Data

T8600D, T8601D AND T8602D CHRONOTHERM
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Time Set Program
Daylight
Run Set Current
Wake Leave Return
Program Day/Time
Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
4. Press Run Program.
Time Set Program
Run
Run Set Current
Wake Leave Return
Program Day/Time
Program
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time

INSTALLER SYSTEM TEST

Use the Installer System Test to check the thermostat operation.
Refer to Table 7 for a list of the available system tests.
To start the system test:
CAUTION
The minimum off time for compressors is bypassed
during the Installer System Test. Equipment damage
can occur if the compressor is cycled too quickly.
Press and hold the increase
same time, until 10 appears. All segments of the display are
displayed for three seconds before 10 appears. See Fig. 10
and 11.
Test
Key to Press Number
Heating Equipment System Test
Time 10
11
10
Cooling Equipment System Test
Time 30
31
30
Fan Equipment System Test
Time 40
41
40
Key Operation System Test
Time 60 2
68-0164—1
®
Set Day/Time
AM
Tue
Sleep
DST
Fan
M10315
AM
Room
Tue
Sleep
Wake
System Fan
DST
Fan
Heat Auto
M10316
and decrease keys, at the
Table 8. Installer System Test Options.
Enter heating equipment system test.
Heat comes on. When Installer Setup number 2 is 1, the system fan is also energized.
Heat and system fan turn off.
Change from heating to cooling equipment system test.
Cool and system fan come on.
Cool and system fan turn off.
Change from cooling to fan equipment system test.
Fan comes on.
Fan turns off.
Change from fan to key operation system test.
IV DELUXE PROGRAMMABLE THERMOSTATS
Set Program Start Time
Hold for
Em Ht
Aux Ht
Mon TueWedThuFriSatSun
Wake LeaveReturnSleep
System
Em Heat Off Cool
Fig. 10. Display of all the segments of the LCD.
Fig. 11. Display of test number.
Table 7. Tests Available in Installer System Test.
Test
Number
10-19 Heating equipment can be turned on and off
30-39 Cooling equipment can be turned on and off
40-49 Fan equipment can be turned on and off
60 0 to Keyboard keys test
60 19
70-79 Thermostat information including date code and
software versions are displayed
Refer to Table 8 for the directions and results of the specific
tests.
NOTE: Press Time
to go to the previous test. Press Run Program to
exit the system test.
Description
10
Set Day/Time Temporary Setting Enrg
AM
PM
%Humid
Heat Cool Outdoor
In Recovery Auto Repl Batt
Fan
DST
Auto Wait On
TEST NUMBER
System Test Description
to advance to the next test and Time
Sav
Room
Auto
M10345
M10257A